SIAST logo

Auto Body Technician


Location(s):  Regina    Saskatoon   

Auto Body Technician is a certificate program. It provides knowledge and basic skill development in motor vehicle body repair and refinishing.

You will receive training in:

  • safe working procedures

  • bench work skills

  • welding

  • plastic material repair

  • basic and advanced metal work

  • door servicing

  • front sheet metal

  • stationary glass installation

  • electrical systems

  • basic and advanced painting

  • industry mechanics

  • industry communications


Length: 30 weeks

More Links

Career Opportunities

Graduates are prepared for entry-level positions in auto body repair shops. They frequently seek apprenticeship in the trade and may decide to specialize in certain areas (i.e., painting, frame and wheel alignment, glass installation or body repair).

Trade time and academic credit may be available for graduates who find employment in the trade and register as apprentices. Please contact the Saskatchewan Apprenticeship and Trade Certification Commission (SATCC) for further information.

For more information about career opportunities related to this program, contact Student Employment Services at the campus nearest you.

Program Details

Start Date(s): Varies

  • August and October - Regina
  • August - Saskatoon

Apply Now

Admission Requirements



Applicants who do not possess the academic qualifications for a program may be admitted if evidence of probable success can be established through a special admission assessment. Interested individuals should still apply. Applicants are automatically considered for special admission. However, some specific admission requirements may still need to be met. You must review the details and program specific documentation concerning Special Admission.


The majority of SIAST programs have established ACCUPLACER© cut scores and Post-Secondary Success Requirements. Depending on the program, additional specific admission requirements may still need to be met.


ACCUPLACER ©     

ACCUPLACER© Cut Scores
for this program

50Arithmetic
65Reading
Post-Secondary Success

Post-Secondary Success Requirements
for this program

One year post-secondary studies


Admission Method

First Qualified/First Admitted

The First Qualified/First Admitted (FQFA) process is used for the majority of SIAST programs. When we determine that you meet the program's admission requirements, you will be offered admission based on the date you fully qualify for the program. The earlier you provide the appropriate documents and information that qualify you for admission to the next intake, the earlier you might begin your studies. Your application, once qualified, is always considered for the next intake.

Applicants to programs with multiple intakes in an academic year remain in the application pool until the last intake for that academic year has begun. Programs using the FQFA process receive applications year round and maintain an application pool for each academic year. Qualified applicants who are not offered a seat must reapply for the next academic year.

Sponsored programs or programs targeted to specific groups do not accept applications year round or maintain an application pool.

Tuition and Fees

  • For complete details on tuition and fees for this program, click here to access the SIAST campus Tuition and Fee Schedules.

Learning Method(s)

SIAST offers a variety of learning methods for course delivery. The following learning methods are available for some of the courses in this program.
      Classroom
      Home Study
      Online
      Work Experience
      Work-based Training

Please refer to the course descriptions for course specific learning methods.

Prior Learning Assessment and Recognition (PLAR) Availability

SIAST recognizes that adults learn in many different ways and through many different means. This includes acquiring knowledge and skills through life and work experience or non-formal training.

Frequently asked questions regarding PLAR for this program are answered in the Fact Sheet. A detailed Candidate Guide, which includes a self-audit for all PLAR-ready courses, has been developed for this program. This information guides a candidate through all steps in the PLAR process.



Transfer Credit and Future Study Options

SIAST may recognize formal learning from other educational institutions.



Courses
expand/contract all

  • BESK 120  Benchwork

    • You will learn how to identify, select, operate and maintain hand and power tools, equipment and fasteners.

    2.0 Credit Units
    10.0 Lecture hours
    20.0 Lab hours
    30.0 Other hours

    Learning Method(s): Lecture/Lab

  • COMM 127  Industry Communications

    • You will practice fundamental employability skills related to oral and written communications. You will also practice employability skills related to working effectively with others. You will learn personal employability skills and the effect of attitudes and behaviours on a successful job search.

    2.0 Credit Units
    30.0 Lecture hours

    Learning Method(s): Lecture/Theory, Independent Study, Work Based Delivery, Prior Learning, Correspondence, Online/Blackboard

    Equivalent Course(s):   BCOM 120    COMM 127A    COMM 185    COMM 187    COMM 191    COMM 193   

  • DOOR 120  Door Servicing

    • You will learn how to remove and replace interior trim panels and remove, service and replace window regulators, door locks and associated hardware. You will also learn how to service, remove and replace movable and stationary door glass. The course content includes repairing and replacing door hinges, aligning doors and sealing doors against wind, water and dust leaks.

    2.0 Credit Units
    9.0 Lecture hours
    25.0 Lab hours
    34.0 Other hours

    Learning Method(s): Lecture/Lab

  • ELEC 120  Electrical Systems

    • The course focuses on identifying, diagnosing, servicing, repairing and replacing automotive wiring, electrical parts and computer components.

    2.0 Credit Units
    20.0 Lecture hours
    10.0 Lab hours
    30.0 Other hours

    Learning Method(s): Lecture/Lab

  • GLAS 120  Glass Removal and Installation

    • You will examine the role of stationary glass in unibody construction. The course content includes glass removal and replacement to factory original specifications.

    1.0 Credit Units
    6.0 Lecture hours
    6.0 Lab hours
    12.0 Other hours

    Learning Method(s): Lecture/Lab

  • MATH 130  Industrial Mathematics

    • After reviewing fractions, decimals and percentages, you will study basic algebra, ratio and proportion, linear measure, areas, volumes, capacities, interrelationships used in the metric system, wage and time calculations, and financial calculations.

    2.0 Credit Units
    30.0 Lecture hours
    30.0 Other hours

    Learning Method(s): Lecture/Theory

  • METL 120  Basic Metal Work

    • Using hammers and dollies, you will learn how to smooth and shape metal panels. You will also learn how to finish automotive panels by filing, grinding and applying body filler. The course content includes repairing minor rust damage.

    10.0 Credit Units
    50.0 Lecture hours
    100.0 Lab hours
    150.0 Other hours

    Learning Method(s): Lecture/Lab

    Prerequisites:
    WELD 178 Minimum Grade of 60 (concurrent)

  • METL 220  Advanced Metal Work

    • Your studies will focus on analyzing repair costs and repairing minor and major collision damage (including fibre-reinforced, plastic and rust repairs).

    8.0 Credit Units
    30.0 Lecture hours
    90.0 Lab hours
    120.0 Other hours

    Learning Method(s): Lecture/Lab

    Prerequisites:
    METL 120 Minimum Grade of 60

  • PLST 120  Plastic Material Repair

    • You will learn how to repair plastic automotive parts and fibre-reinforced panels.

    2.0 Credit Units
    7.0 Lecture hours
    21.0 Lab hours
    28.0 Other hours

    Learning Method(s): Lecture/Lab

  • PNTG 120  Basic Painting

    • Your studies will focus on preparing substrate (including sanding, masking, paint stripping and applying primers, surfacers and sealers). The course content includes mixing and applying paint to single and multiple panels, preparing and painting plastics, and cleaning and servicing spray guns, spray booths and air supply systems. You will also learn how to polish new and old finishes, and clean and detail vehicles for delivery.

    7.0 Credit Units
    25.0 Lecture hours
    75.0 Lab hours
    100.0 Other hours

    Learning Method(s): Lecture/Lab, Work Based Delivery

  • PNTG 220  Advanced Painting

    • You will learn how to match colour, use blending techniques and do spot repairs. You will also learn how to remove and replace wood grain transfers, decals and pin striping, identify and correct paint defects, and apply tri-coat finishes. Your project will be to paint a vehicle.

    8.0 Credit Units
    30.0 Lecture hours
    88.0 Lab hours
    118.0 Other hours

    Learning Method(s): Lecture/Lab

    Prerequisites:
    PNTG 120 Minimum Grade of 60

  • PRAC 121  Industrial Attachment

    • To become familiar with the industry, you will spend two weeks in an auto body repair shop.

    0.0 Credit Units
    60.0 Lab hours
    60.0 Other hours

    Learning Method(s): Work Experience - Group

  • SFTY 126  Safe Working Procedures

    • You will study and follow the basic principles of shop safety when working with and around equipment, tools and chemicals used in the auto body trade.

    2.0 Credit Units
    30.0 Other hours

    Learning Method(s): Lecture/Lab

  • SHME 120  Front Sheet Metal

    • You will learn how to remove, install and align bumpers, hoods, header panels, fenders, radiator supports and headlight assemblies.

    2.0 Credit Units
    7.0 Lecture hours
    21.0 Lab hours
    28.0 Other hours

    Learning Method(s): Lecture/Lab

  • WELD 178  Welding

    • You will learn how to fusion weld light gauge metal used in the auto body industry using metal inert gas (MIG) welding procedures. You will also learn how to perform resistance spot welds. You will learn to cut metals using both a cutting torch and plasma arc cutters.

    7.0 Credit Units
    25.0 Lecture hours
    75.0 Lab hours
    100.0 Other hours

    Learning Method(s): Lecture/Lab

    Explore Related Programs

    More Information


    © Saskatchewan Institute of Applied Science and Technology | webmaster | Last Modified: September 02, 2010 09:42AM