You will be presented with background theory and math as necessary to support a comprehensive understanding of networking fundamentals. You will examine ethernet technology in relation to its dominance in industry. You will discuss the OSI and TCP/IP models are discussed, beginning with physical cabling and working up through devices (such as repeaters/hubs, bridges/switches and to routers). At the completion of the course you will be able to create and test Local Area Network (LAN) cables, physically cable a LAN, select devices, plan and implement subnets, configure networking parameters and connect computers into a high speed LAN. You will also complete requirements for Cisco Certified Networking Associate (CCNA) Semester 1.

4.0 Credit Units
64.0 Other hours

Learning Method(s): Lecture/Lab

You will learn how to produce user functions to automatically generate geometry (based on user specified input). You will develop programs and functions in both LISP and VBA.

2.0 Credit Units
35.0 Other hours

Learning Method(s): Lecture/Lab

Equivalent Course(s):   CAD 192   

Prerequisites:
DRFT 391 Minimum Grade of 60

You will integrate non-CAD computer software with CAD software. You will practice the basic concepts of engineering graphics. You will sketch and use AutoCAD. You will use orthographic and isometric projection for shape description. You will draw sectional, auxiliary and partial views. You will develop skill in dimensioning and tolerancing using engineering drawing.

5.0 Credit Units
80.0 Other hours

Learning Method(s): Lecture/Lab

Equivalent Course(s):   DRFT 181    GRPH 190   

Prerequisites:
DRFT 390 Minimum Grade of 60

You will study the basic concepts of computer assisted drafting. You will learn how to use the AutoCAD user interface as it pertains to two dimensional CAD drawings. The course content includes drawing set-up, coordinate systems, drawing tools, editing commands, display options, layers, colors, line types, text, basic dimensioning and plot commands.

2.0 Credit Units
30.0 Other hours

Learning Method(s): Lecture/Lab, Prior Learning, Online/Blackboard

You will study advanced concepts of computer assisted drafting. The course content includes blocks, XREF's, plotting, dimensioning, advanced editing and drawing techniques and an introduction to 3D drafting.

2.0 Credit Units
30.0 Other hours

Learning Method(s): Lecture/Lab, Prior Learning, Online/Blackboard

Prerequisites:
DRFT 390 Minimum Grade of 60

Your studies will focus on gaining knowledge of computer operation. You will perform computer component installation. You will learn computer maintenance techniques. Classroom and lab experiences will help you analyze failed computer systems. The course content includes returning a failed computer to operational status. You will be able to communicate with others about computer systems and related hardware.

4.0 Credit Units
64.0 Other hours

Learning Method(s): Lecture/Lab

You will learn how to use basic algebra and trigonometry to determine the forces in stationary machine and equipment members. The course content includes force systems, center of gravity, static friction and moment of inertia, and the application of these principles to engineering problems.

5.0 Credit Units
77.0 Other hours

Learning Method(s): Lecture/Lab, Online/Blackboard

Equivalent Course(s):   ENGM 190   

Prerequisites:
MATH 182 Minimum Grade of 60 or MATH 193 Minimum Grade of 60

Your studies will cover logarithmic, algebraic and trigonometric functions, and trigonometric identities. You will also receive an introduction to differential calculus of algebraic functions.

5.0 Credit Units
80.0 Lecture hours

Learning Method(s): Lecture/Theory

Equivalent Course(s):   MATH 182   

You will receive an orientation to your program and learn where and how the technician/technologist fits into the workplace and society. You will become familiar with the role of technicians/technologists in society, study and time management skills, increasing diversity in the workplace, principles of sustainability, the impact of technology on society and workplace safety requirements.

1.0 Credit Units
16.0 Lecture hours

Learning Method(s): Lecture/Theory, Prior Learning

Equivalent Course(s):   ENGM 181    ETHC 183    ORTN 120   

Your studies will focus on the basic skills required of the technologist in the workplace. You will examine the communication process and interpersonal and workplace communication techniques. The course content includes technical writing and job search skills.

3.0 Credit Units
48.0 Lecture hours

Learning Method(s): Lecture/Theory, Learn Linc, Prior Learning, Online/Blackboard

Equivalent Course(s):   JOBS 288    JOBS 290    TCOM 120    TMGT 180   

You will develop programs and functions that integrate AutoCAD and databases. You will learn SQL and advanced techniques dealing with databases. You will use a programming language to link databases with objects in AutoCAD.

2.0 Credit Units
25.0 Other hours

Learning Method(s): Lecture/Lab

Prerequisites:
CAD 297 Minimum Grade of 60

Building on the knowledge you acquired in MATH 193 (Mathematics), you will study the differentiation and integration of algebraic and transcendental functions, and applications of these concepts to max/min problems, related rates, root solutions, areas, centroids and moments of inertia.

5.0 Credit Units
72.0 Lecture hours

Learning Method(s): Lecture/Theory, Prior Learning

Equivalent Course(s):   CALC 181   

Prerequisites:
MATH 193 Minimum Grade of 60

You will gain an understanding of computer programming by developing your basic programming skills and knowledge, and applying them to the structured solution of engineering problems. Developing good programming habits, flowcharts/ algorithms and structured, modular programs that are well documented and tested will be emphasized. You will use Graphical User Interfaces to provide high-quality presentations of program data and results, and to conform to the high standards and expectations of today's users.

4.0 Credit Units
64.0 Other hours

Learning Method(s): Lecture/Lab, Prior Learning

Your Semester 1 introductory drafting skills will serve as a foundation for this course. You will learn how to prepare a complete set of working drawings on the CAD system. You will become familiar with standard drafting practices and symbols used in a number of different engineering fields.

5.0 Credit Units
80.0 Other hours

Learning Method(s): Lecture/Lab

Prerequisites:
DRFT 290 Minimum Grade of 60 and DRFT 391 Minimum Grade of 60

Your studies will focus on the relationship between external applied loads and the induced internal stresses in various structural members. You will discuss design and analysis techniques of axial and torsionally loaded members, beams, columns and joints. You will also investigate how materials behave under complex stress states.

5.0 Credit Units
80.0 Other hours

Learning Method(s): Lecture/Lab

Prerequisites:
ENGM 191 Minimum Grade of 60

You will gain practical knowledge of the fundamental structure, properties (physical, mechanical, chemical) and supplied form of common engineering materials. This knowledge will assist in the evaluation and selection of materials suitable for given design and/or manufacturing processes. Major focus will be directed towards iron and iron alloys (steels), with additional examination of non-iron metals and alloys (aluminum, copper, etc), ceramics, polymers, and composite materials. Your studies will also include areas such as material corrosion and non-destructive examination.

5.0 Credit Units
77.0 Other hours

Learning Method(s): Lecture/Lab

Equivalent Course(s):   ENG 191    ENGM 288   

You will study fluid properties, the behaviours of fluids either at rest or in motion, Bernoulli's equation, fluid forces and buoyancy. Design problems will involve pipe sizing, calculating head loss, friction factors, power requirements and selecting pumps and motors. Your lab work will include performing experiments on pressure measurement, fluid friction losses and piping systems.

4.0 Credit Units
64.0 Other hours

Learning Method(s): Lecture/Lab

You will gain an understanding of machine shop principles and practices. This course will serve as a foundation for further studies in manufacturing. In addition to lectures and demonstrations, you will receive extensive hands-on experience.

2.0 Credit Units
30.0 Other hours

Learning Method(s): Lecture/Lab, Prior Learning

Equivalent Course(s):   MACH 120   

You will have an opportunity to widen your exposure to mechanical components and systems. The knowledge you acquire will serve as a foundation for upper level courses. Your studies will focus on the application and operation of the components and systems rather than their use in the design process. You will work with and disassemble or assemble some of the components (others will be demonstrated for you). Some of the items you will investigate include bearings, shafts, chain belt and gear drives, hydraulic pumps, motors and cylinders, pneumatic systems, conveyors, and pneumatic and hydraulic flow and pressure control valves.

2.0 Credit Units
24.0 Other hours

Learning Method(s): Lecture/Lab

Building on the skills you developed in TCOM 102 (Communication in Technology), you will apply basic research skills to create workplace documents. Your studies will focus on the workplace skills of creating effective client relations, conducting meetings and giving presentations.

3.0 Credit Units
48.0 Lecture hours

Learning Method(s): Lecture/Theory, Online/Blackboard

Equivalent Course(s):   COMM 181    COMM 190    TCOM 123    TCOM 190   

Prerequisites:
TCOM 102 Minimum Grade of 60

You will observe and perform welding, thermal cutting and metal forming operations. You will develop an understanding of processes rather than skill. Supervised hands-on training will help you develop an understanding of Shielded Metal Arc Welding, Gas Metal Arc Welding, Flux Cored Arc Welding, Gas Tungsten Arc Welding, Oxy-Fuel Welding and Submerged Arc Welding. Your metal cutting activities will include Oxy-fuel Cutting and Plasma Arc Cutting. You will perform metal forming activities on a plate roll, press brake and structural roll.

2.0 Credit Units
30.0 Other hours

Learning Method(s): Lecture/Lab

Equivalent Course(s):   WELD 102   

You will develop an understanding of 3-Dimensional CAD through a study of wire frame, surface and solid model construction methods. You will learn techniques for documenting 3D models using the traditional 2D views and dimensioning associated with working drawings. You will also select a project (assembly or mechanism) and create a 3D parametric solid model that will be used as a starting point for CAD 295 (Virtual and Rapid Prototyping).

4.0 Credit Units
64.0 Other hours

Learning Method(s): Lecture/Lab

Prerequisites:
DRFT 291 Minimum Grade of 60

Your studies will focus on the methods of using computers to help create a code of instructions to manufacture a part on a computer numerical machine. You will solve practical manufacturing problems using traditional CNC techniques. You will gain hands-on experience using industrial CNC equipment and modern controllers. You will also set up raw stock and configure tooling with different machine set-ups, configurations and machine metal parts.

4.0 Credit Units
64.0 Other hours

Learning Method(s): Lecture/Lab

Prerequisites:
COSC 193 Minimum Grade of 60 and WELD 387 Minimum Grade of 60

You will learn the techniques of design, analysis and selecting various machine components (including belt and chain drive components, wire rope, fasteners, bolted connections, welded joints and combined stresses). You will also learn traditional design methods and then use computer solutions extensively to augment the design process.

3.0 Credit Units
48.0 Other hours

Learning Method(s): Lecture/Lab

Prerequisites:
SHOP 186 Minimum Grade of 60 and ENG 192 Minimum Grade of 60 and ENGM 180 Minimum Grade of 60

You will be provided an introduction to the fundamentals of DC and AC measurement and circuitry (including Ohm's Law, power and series and parallel circuits). A laboratory program is an integral part of this course.

4.0 Credit Units
64.0 Other hours

Learning Method(s): Lecture/Lab

Equivalent Course(s):   ELEC 190   

You will study dynamics theory and principles in this course. You will solve kinematics and kinetics problems using principles of relative velocity and Newton's laws of motion. You will analyze forces and motion of mechanical systems using principles of work, energy, and energy conservation. You will study the principles of momentum. You will analyze machine element linkages and vibrations using manual methods and computer software.

4.0 Credit Units
64.0 Other hours

Learning Method(s): Lecture/Lab

Equivalent Course(s):   ENGM 289   

Prerequisites:
ENG 192 Minimum Grade of 60

You will learn the concepts involved in growing a manufacturing-based company from a small business to a large operation. You will learn about facility analysis, ordering processes and dealing with suppliers.

2.0 Credit Units
32.0 Other hours

Learning Method(s): Lecture/Lab

You will gain an understanding of the merits and limitations of the manufacturing and fabrication industry. You will study the use of engineering principles to solve manufacturing and fabrication problems. Your studies will concentrate on the metal industry but you will tour several manufacturing operations to gain a broad view of the different types of manufacturing. You will gain an understanding of surface finishes and geometric dimensioning and tolerancing. You will also learn how to apply them to engineering drawings.

5.0 Credit Units
80.0 Other hours

Learning Method(s): Lecture/Lab, Prior Learning

Prerequisites:
DRFT 291 Minimum Grade of 60 and ENG 192 Minimum Grade of 60 and ENGM 180 Minimum Grade of 60 and MACH 191 Minimum Grade of 60 and WELD 387 Minimum Grade of 60

You will study the basic laws of thermodynamics as applied to energy conversion devices and the fundamentals of heat transfer. You will apply these principles to mechanical equipment (such as internal combustion engines, compressors, steam plants, refrigeration systems and heat exchangers). Performing experiments in the lab will provide you with hands-on experience. You will gain a working knowledge of the broad subject areas of thermodynamics.

4.0 Credit Units
64.0 Other hours

Learning Method(s): Lecture/Lab, Prior Learning

You will complete an industrial project (acquired from a local company) that will involve a significant component of design, analysis and/or manufacturing technology. You will select, define and assess the problem, prepare and coordinate the results, and present the results to your client. The project will demonstrate your capacity to apply the knowledge you have acquired from several previous and concurrent courses to solving a "real life" problem in a practical way. You will present your project in the form of a written technical report and an oral presentation.

3.0 Credit Units
52.0 Other hours

Learning Method(s): Lecture/Lab

Corequisites:   CAD 288    CAD 295    CAD 298    DSGN 282    DSGN 283    ENG 291    ENG 292    MANU 291    MANU 293    PROJ 287    TCOM 104   

Prerequisites:
CAD 283 Minimum Grade of 60 and CAD 287 Minimum Grade of 60 and DSGN 280 Minimum Grade of 60 and ELEC 279 Minimum Grade of 60 and ENGM 290 Minimum Grade of 60 and MANU 280 Minimum Grade of 60 and MANU 290 Minimum Grade of 60 and THER 283 Minimum Grade of 60

Building on the skills you developed in CAD 287 (Computer Aided Manufacturing 1) and using CAD/CAM systems, you will learn how to generate CNC code to operate machine tools. You will study methods of creating and importing geometry as wire frame, freeform surfaces or solids. You will then use the CAM software to create CNC code to cut the part.

4.0 Credit Units
64.0 Other hours

Learning Method(s): Lecture/Lab

Prerequisites:
CAD 287 Minimum Grade of 60

Building on the skills developed in CAD 283 (Advanced CAD Modeling), you will use the 3D models you created in the major project to produce virtual prototypes using photo-realistic images and animated sequences. You will produce a one minute animated video of the model that shows the assembly of the components or the operation of a mechanism. Your animation will be created and used in the context of being an extremely valuable visualization tool for use in the engineering design process. You will also create a rapid prototype model of one of your components out of ABS plastic using a StrataSys FDM (fused deposition modeler) Rapid Prototyping machine.

3.0 Credit Units
48.0 Other hours

Learning Method(s): Lecture/Lab

Prerequisites:
CAD 283 Minimum Grade of 60

You will investigate advanced features of CAD software used in the program and in local industry. Where possible, local users with product expertise will be invited to present a seminar and share their expertise. Incremental upgrades to software that you have already learned will be presented as time permits. You will also receive an introduction to other relevant software that is not directly taught or used in other courses but may prove valuable when you are employed.

1.0 Credit Units
16.0 Lecture hours

Learning Method(s): Lecture/Theory

Equivalent Course(s):   CAD 286   

You will study the basics of managing engineering documentation. You will learn to manage computer systems in an engineering environment. The course provides an introduction to the functions of a system operator/manager. You will learn the requirements to plan for, deploy and manage a system of computers in an engineering and manufacturing environment. Classroom and lab experiences will help you install a current networked operating system and set up and administrate users, groups, hardware and software.

2.0 Credit Units
32.0 Other hours

Learning Method(s): Lecture/Lab

Prerequisites:
CAD 191 Minimum Grade of 60 and ELTR 287 Minimum Grade of 60

Building on the skills you developed in DSGN 280 (Mechanical Design 1), you will learn the techniques of design, analysis and selecting various machine components. You will study bearings, shafts, springs, couplings, gears, clutches, brakes and cams. You will examine traditional design methods and then use computer solutions extensively to augment the design process. The combined material from DSGN 280 (Mechanical Design 1) and this course will be directed toward CAD 285 (Industry Design Project).

5.0 Credit Units
80.0 Other hours

Learning Method(s): Lecture/Lab

Prerequisites:
DSGN 280 Minimum Grade of 60

You will learn how to develop and evaluate several components in the design of a machine. You will select and integrate bearings, shafts, springs, couplings, gears, clutches, brakes and cams based on the design knowledge you acquired in DSGN 280 (Mechanical Design 1) and DSGN 282 (Mechanical Design 2).

2.0 Credit Units
30.0 Other hours

Learning Method(s): Lecture/Lab

Prerequisites:
DSGN 282 Minimum Grade of 60

You will learn how to take a design from concept to finished product. You will closely integrate and constantly check the integrity of the engineering design, design documentation, engineering analysis and manufacturability of the product. Your studies will focus on managing the continuous feedback among all aspects of the process, ensuring they are considered in parallel rather than sequential and ensuring they use common databases wherever possible.

4.0 Credit Units
62.0 Other hours

Learning Method(s): Lecture/Lab

Prerequisites:
CAD 283 Minimum Grade of 60 and CAD 295 Minimum Grade of 60 and DSGN 282 Minimum Grade of 60 and ENG 292 Minimum Grade of 60 and ENGM 290 Minimum Grade of 60

You will gain experience using FEM software by applying several programs to the solution of typical analysis problems. You will develop an appreciation of the power and limitations of FEM by comparing computer-produced results with experimentally derived data and alternative classical methods of stress analysis.

4.0 Credit Units
64.0 Other hours

Learning Method(s): Lecture/Lab

Prerequisites:
CAD 283 Minimum Grade of 60 and ENG 192 Minimum Grade of 60

You will develop an understanding of flexible automation using robotics. You will discuss the technology, observe videotapes of several industrial applications and attend industry tours to observe robotic systems in industry. You will learn how to program an industrial robot to perform various tasks. To gain an overall understanding of robotics, you will investigate end-of-arm tooling, parts presentation and cost justification. You will receive an introduction to other related technology (including machine vision systems, industrial sensors, and data acquisition and control). You will integrate this knowledge into a design project where a fabricated metal part will be reverse engineered and taken from drawings to welded part. Your project will include part layout for laser cutting (where necessary), design and fabrication of jigs, robot programming and weld jobs.

4.0 Credit Units
56.0 Other hours

Learning Method(s): Lecture/Lab

Prerequisites:
ELTR 287 Minimum Grade of 60 and WELD 387 Minimum Grade of 60

Your studies will focus on quality assurance in a manufacturing environment. The importance of quality products and services will be emphasized. You will become familiar with the statistical sampling and analysis tools used to achieve and verify quality goals.

4.0 Credit Units
64.0 Other hours

Learning Method(s): Lecture/Lab

You will be introduced to project management. You will examine the basic theory of project planning and control, from project initiation to project close out. You will apply research techniques and various tools to practice project management theory in a variety of projects. You will practice skills using project management software.

2.0 Credit Units
30.0 Other hours

Learning Method(s): Lecture/Lab

You will develop a technical proposal and apply advanced research skills to a technical problem. You will use the technical problem-solving process in an applied research project and present your research findings in a written report and oral presentation.

2.0 Credit Units
34.0 Lecture hours

Learning Method(s): Lecture/Theory

Equivalent Course(s):   COMM 115    COMM 182    COMM 290   

Prerequisites:
TCOM 103 Minimum Grade of 60